Corner TV Wall Mount Installation
Corner mounting is the ideal solution when wall space is limited, the room layout doesn't accommodate a flat-wall installation, or you want a single TV visible from multiple areas. Full-motion articulating mounts attach to the corner and extend outward, letting you swivel the screen toward the living room, kitchen, or dining area as needed. Experienced technicians handle the unique stud-finding and bracket alignment challenges that corners present.
Why Choose a Corner Mount?
Corners are often underutilized space in a room. A corner-mounted TV turns dead space into a functional entertainment area without dominating a primary wall. Corner installations are especially popular in open floor plans where the TV needs to be visible from the kitchen, dining area, and living room simultaneously. Full-motion mounts allow you to pull the TV away from the corner and rotate it toward whichever area you are using, then push it back flush when not in use.
Full-Motion Articulating Brackets for Corners
Corner installations almost always use full-motion articulating mounts. These brackets extend 12 to 24 inches from the wall and swivel up to 180 degrees, giving you complete control over the viewing angle. We select brackets with the right arm length and weight rating for your TV, ensuring smooth movement and stable positioning at every angle. The bracket is anchored to studs on one or both walls forming the corner, depending on the construction.
Stud Finding in Corner Installations
Corners present a unique structural challenge. The studs on each wall forming the corner may not align conveniently for bracket placement. We use professional stud finders and inspection tools to locate the best anchor points. When studs are not ideally positioned, we install a backing plate that spans across the corner framing to create a solid, distributed mounting surface. Every corner installation is engineered for safety and stability.
Cord Concealment in Corners
Cable routing in corners can be tricky because the TV often sits away from the wall when extended. We route cables through the wall cavity to a point behind the bracket, then use flexible cable management along the articulating arm to keep cables tidy at every extension angle. For corners with brick or concrete, surface raceways follow the wall contour down to the media source.