How to Mount Two TVs Side by Side on One Wall
Dual TV setups are popular for sports fans, gamers, and home offices. Here is how to plan the spacing, handle the weight, and keep the cables clean when mounting two screens on one wall.
When a Dual TV Setup Makes Sense
Two TVs mounted side by side on a single wall is not just a sports bar luxury — it is a setup that makes practical sense in several home scenarios. Sports fans who follow multiple games simultaneously can watch two broadcasts without switching channels or squinting at a picture-in-picture box. Gamers in the same household can play side by side on separate screens without splitting a single display. Home offices and trading desks use dual displays for monitoring dashboards, video feeds, or reference material alongside active work. And dedicated media rooms sometimes pair a large primary screen with a smaller secondary display for scores, stats, or a second camera angle during big events. The key to a successful dual installation is treating each TV as an independent structural load while planning the visual layout as a unified design. Two 55-inch TVs on a wall create roughly the same visual footprint as a single 85-inch display, but the hardware, stud requirements, and cable routing are completely different.
Spacing, Alignment, and Visual Balance
The gap between two side-by-side TVs should be consistent and intentional. A spacing of 1 to 3 inches between the nearest edges creates a tight, unified look similar to a video wall. Wider spacing of 4 to 8 inches gives each screen its own visual space and looks more like two separate installations that happen to share a wall. The right gap depends on whether you want the two screens to feel like one continuous display or two independent ones. Vertical alignment is critical — the center points of both TVs should be at the same height, and the top and bottom edges should be perfectly level with each other. Even a quarter inch of vertical offset between two adjacent screens is immediately noticeable. For TVs of different sizes — a 65-inch primary and a 42-inch secondary, for example — align the vertical centers rather than the top edges. This creates a more balanced look than lining up the tops, which leaves an awkward gap at the bottom of the smaller screen.
Structural Requirements for Two TVs
Two TVs on one wall means double the weight load concentrated in a relatively small area. Each TV needs its own independent mount secured into wall studs with lag bolts — you cannot share mounting hardware between two TVs unless using a specialty dual-TV bracket designed for the purpose. Standard wood stud framing on 16-inch centers provides four to five usable studs across a typical dual-TV span, which is generally sufficient. However, if both TVs use full-motion mounts, the leverage forces when both arms are extended create significant combined torque on a concentrated section of wall framing. For two large TVs (65 inches and above) on full-motion mounts, reinforcing the wall with a plywood backer board behind the drywall distributes the load across more framing members and eliminates any risk of drywall fatigue over time. Your technician will assess the wall framing, calculate the combined load, and determine whether reinforcement is needed. In most cases with fixed or tilt mounts, standard stud mounting handles two TVs without any reinforcement.
Cable Management for Dual TV Installations
Two TVs means double the cables — two HDMI runs, two power connections, and possibly two ethernet connections if both displays are smart TVs or connect to separate source devices. The cleanest approach routes all cables through the wall to a single exit point behind a media console or equipment shelf below. A single wide cable pass-through plate or two individual plates side by side at outlet height keep the exit points organized. Each TV gets its own in-wall cord concealment run with a UL-listed power bridge kit, and the cables drop to the shared equipment location below. If the two TVs connect to different source devices — one to a cable box and one to a gaming console, for example — label each cable run during installation so future troubleshooting is straightforward. For a dual-TV sports setup where both screens show cable or streaming content, an HDMI splitter or matrix switch at the equipment shelf allows you to route any source to either screen. Book a dual TV installation with transparent pricing. Our technicians handle the layout, mounting, cable routing, and equipment setup for a result that looks intentional and professional.